Envelope Punch Board Money Holder Tutorial & New Everyday Occasions Cardmaking Kit

After making the long narrow card that I shared with you yesterday, the idea to create a money holder card using the Envelope Punch Board popped into my head.  I created a holiday and a birthday version and I’m sharing a quick tutorial showing you the size and scoring points.  I’m putting this out on my Tutorials page as well so that you can find it back quickly when you need it.

My holiday money holder card front was inspired by Retrosketches #82 and I used the Very Merry Tags and Wishing You stamp sets from Stampin’ Up! to create it.

Very Merry Tags

I used the Make a Wish and Sassy Salutations stamp sets from Stampin’ Up! to create the birthday version of the card.

Make a Wish

I’ll start by showing you the quick tutorial for the card base.  Both versions use the same card stock size and measurements for the base.

Money Holder Tutorial

Cut a 8-1/4″ x 7″ card stock panel.  Score the panel at 3″ and 6″.

Money Holder Tutorial 1

Turn the card stock 90 degrees and place the end with the score line closest to it into the Envelope Punch Board.  Line up the left side of the card stock with the 3-1/2″ line and punch.

Money Holder Tutorial 2

Money Holder Tutorial 3

Line up the bottom of the punch “v” notch with the cutting point on your trimmer and cut the card stock from the edge to the notch on one side.

Money Holder Tutorial 4

This is what your card stock should look like after you’ve cut it.

Money Holder Tutorial 6

Flip your card stock over and fold the notched flap toward the center and the top flap toward the center.  Adhere the sides of your pocket with a piece of Sticky Strip on each side.  Then decorate as you wish!  Just an FYI, the white card stock inside the pocket is not adhered on my card, I put it inside so that you could see the pocket better in the picture.

Money Holder Tutorial 5

To decorate the front of the holiday card, I cut a panel of Season of Style DSP  lengthwise 1″ from the edge.  I used blue painters tape and I taped the two panels together at the distance that I wanted, then taped the Circles Collection Framelits die to the DSP panels and I ran it through the Big Shot.  I left everything taped together and I applied SNAIL to the back of the DSP and I adhered both panels to the card front at the same time to help me with the spacing.  Once the panels were adhered, I removed the Framelit and painters tape.

Very Merry Tags 1

I colored the image from the Very Merry Tags stamp set with my Stampin’ Write Markers and I stamped it on a Whisper White panel.  I punched the image out with the 1-3/4″ Circle Punch and adhered it to the card front with Stampin’ Dimensionals.

Very Merry Tags 4

I adhered a Neutrals Designer Button  with a Glue Dot after tying a piece of Cherry Cobbler Baker’s Twine through it to the other side.

Wishing You

I stamped the sentiment from the Wishing You stamp set in Cherry Cobbler ink on a Whisper White panel, punched it out with the Scallop Oval Punch, adhered it to a Cherry Cobbler Extra Large Oval Punch with SNAIL, then adhered it to the inside of the card with SNAIL.  I stamped the other part of the sentiment in Cherry Cobbler ink on the card base, then I adhered a strip of the Season of Style DSP with SNAIL to complete it.

Very Merry Tags

I also made an envelope with the instructions from the Envelope Punch Board for a 3″ x 7″ card from the Season of Style DSP.

Stampin’ Up! products used to create this card and envelope:

Stamps:  Wishing You (131748 wood, 131751 clear); Very Merry Tags (130393 wood, 130402 clear)

Dies & Punches:  Circles Collection Framelits Dies (130911); 1-3/4″ Circle Punch (119850); Scallop Oval Punch (119856); Extra-Large Oval Punch (119859)

Embellishments:  Neutrals Designer Buttons (130031); Cherry Cobbler Baker’s Twine (123125)

Ink:  Cherry Cobbler Classic Stampin’ Pad (126969); Cherry Cobbler (119681) & Crumb Cake (120967) Stampin’ Write Markers

Tools:  Envelope Punch Board (133774); Blue Painters Tape

Card Stock  & Cuts:  Crumb Cake (120953) – 7″ x 8-1/4″ card base scored at 3″ & 6″; Whisper White (100730) – 1-3/4″ Circle Punch, Scallop Oval Punch; Cherry Cobbler (119685) – Extra-Large Oval Punch; Season of Style Designer Series Paper (132340) – 2-5/8″ x 6-3/4″ panel cut at 1″,  1/2″ x 7″ strip inside card, 8-1/4″ x 8-1/4″ panel for envelope

Adhesive:  SNAIL Adhesive (104332); Stampin’ Dimensionals (104430); Sticky Strip (104294)

Make a Wish

I started the birthday money holder by coloring the sentiment from the Make a Wish stamp set with my Stampin’ Write Markers and stamping it on a Crisp Cantaloupe panel.  I scored the panel with my Simply Scored Diagonal Plate every 1″.  Then I scored the panel a second time at the 1/4″ marks (1-1/4″, 2-1/4″, 3-1/4″ etc).  I adhered the stamped panel to Bermuda Bay card base with SNAIL.

Make a Wish 1

I adhered a panel of Birthday Basics DSP to a panel of Bermuda Bay card stock, then to the card front with SNAIL.

Make a Wish 2

I punched chevrons using the Chevron Border Punch from Summer Starfruit, Bermuda Bay, Gumball Green, Raspberry Ripple and Basic Bray card stock and I adhered them to the card front with SNAIL.  I finished the card front by adding a rhinestone to each of the chevrons.

Sassy Salutations

I finished the inside of the card by stamping the sentiment from the Sassy Salutations stamp set in VersaMark ink, sprinkling it with White Stampin’ Emboss Powder and heat embossing it, then adhering a strip of the Birthday Basics DSP with SNAIL.  ***Note, I stamped and embossed the panel before I adhered the sides closed so that I wouldn’t get embossing powder inside the pocket.

Make a Wish

I made an envelope for the card with the Envelope Punch Board and I added a strip of Birthday Basics DSP and a 7/8″ Scallop Circle Punch from Raspberry Ripple card stock using SNAIL to adhere them and an In Color Boutique Details using a Glue Dot to adhere it.

Stampin’ Up! products used to create this card and envelope:

Stamps:  Make a Wish (131928 wood, 129222 clear); Sassy Salutations (132070 wood, 126707 clear)

Punches:  Chevron Border Punch (132154); 7/8″ Scallop Circle Punch (129404)

Embellishments:  Rhinestone Basic Jewels (119246); White Stampin’ Emboss Powder (109132); In Color Boutique Details (130938)

Ink:  VersaMark Pad (102283); Bermuda Bay (131899) Summer Starfruit & Gumball Green (126856) Stampin’ Write Markers

Tools:  Envelope Punch Board (133774); Simply Scored Scoring Tool (122334); Simply Scored Diagonal Plate (125586)

Card Stock  & Cuts:  Bermuda Bay (131197) – 7″ x 8-1/4″ card base scored at 3″ & 6″, 1-3/4″ x 6-1/4″ panel, Chevron Border Punch, 8-1/4″ x 8-1/4″ panel for envelope; Crisp Cantaloupe (131298) – 2-3/4″ x 6-3/4″ panel; Gumball Green (126840) – Chevron Border Punch; Summer Starfruit – (126839) – Chevron Border Punch; Raspberry Ripple (126842) – Chevron Border Punch, 7/8″ Scallop Circle Punch; Basic Gray (121044) – Chevron Border Punch; Birthday Basics Designer Series Paper (130145) – 1-5/8″ x 6″ panel,  1/2″ x 7″ strip inside card, 1/2″ x 3″ strip for envelope

Adhesive:  SNAIL Adhesive (104332); Stampin’ Dimensionals (104430); Sticky Strip (104294); Glue Dots (103683)

___________________________________________________________________________

Everyday Occasions Cardmaking Kit Now Available From Stampin’ Up!

Everyday Occasions Cardmaking Kit Item 134797 $29.95

Why go to the store when a birthday, graduation, wedding or even a time for expressing gratitude comes up?  The Everyday Occasions Cardmaking Kit puts cards for all of those events right at your fingertips, and best of all, they’ll be handmade!  The kit contains everything necessary (minus adhesive and scissors) to create 20 beautiful cards for almost any occasion, and it comes in a beautiful box to store them in. The kit is the perfect for someone new to stamping and card making, for a busy stamper who wants to be able to make the perfect card for any occasion in a snap or for giving as a gift!  Click here to see the Everyday Occasions Cardmaking Kit in my online store.

Click on the flyers below to see all of the pieces included in the kit as well as the finished cards that you can make with it.

Screen Shot 2013-09-26 at 1.13.28 PM

Screen Shot 2013-09-26 at 1.13.41 PM

___________________________________________________________________________

If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Order Stampin’ Up! Online Now button on the right side of the screen to go directly to my online store or drop me an email if you have any questions.

Don’t forget about the Butterfly Bundle – Purchase the Papillon Potpourri Stamp Set and Bitty Butterfly Punch in a bundle and save 15% through September 30.  Click on my Promotions tab above to read all of the details. 

Plus I’ve got a September ordering special where you could win one of two $25 gift certificates!  Click on my Rewards tab above to read all about it.

Happy Stamping!

Amy

  • Visit my online store here.
  • Shop the Clearance Rack here.
  • Earn FREE Stampin’ Up! Products – Join my Running Shoe Rewards Program – My online customer thank you program!
  • In addition to my online store, also take PayPal payments for orders – Check my Rewards page for more information.
  • I offer gift certificates for Stampin’ Up! merchandise too!  Click on my Gift Certificates page for more information.

17 thoughts on “Envelope Punch Board Money Holder Tutorial & New Everyday Occasions Cardmaking Kit

  1. The env. punch board has already made it to my list for special card envelopes, but now I have more reasons to justify it! Very clever!!

  2. I wish I wasd moved already so I could get my envelope punch board ordered. I love these money cards, Amy. They’re great! Thanks for sharing the steps!

  3. Lovely! Worth mentioning that for UK crafters, you will have to change the size tho. For a good fit for a £20 use a bit of cardstock of 10×6.5, scoring at 3.5 and 3.5 🙂 Am now using one of these to save up for my house move.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.